24dbc0496b
I've been coding from my iPad to Raspberry Pi going on several months. I feel a pro at it and far prefer it over a cloud service for it has far less lag being local hosted.
75 lines
4.5 KiB
Markdown
75 lines
4.5 KiB
Markdown
<!-- START doctoc generated TOC please keep comment here to allow auto update -->
|
|
<!-- DON'T EDIT THIS SECTION, INSTEAD RE-RUN doctoc TO UPDATE -->
|
|
# iPad
|
|
|
|
- [Known Issues](#known-issues)
|
|
- [How to access code-server with a self signed certificate on iPad?](#how-to-access-code-server-with-a-self-signed-certificate-on-ipad)
|
|
- [Servediter iPad App](#servediter-ipad-app)
|
|
- [Raspberry Pi USB-C Network](#raspberry-pi-usb-c-network)
|
|
|
|
<!-- END doctoc generated TOC please keep comment here to allow auto update -->
|
|
|
|
## Known Issues
|
|
|
|
- Getting self signed certificates certificates to work is involved, see below.
|
|
- Keyboard may disappear sometimes [#1313](https://github.com/cdr/code-server/issues/1313), [#979](https://github.com/cdr/code-server/issues/979)
|
|
- Trackpad scrolling does not work [#1455](https://github.com/cdr/code-server/issues/1455)
|
|
- See [issues tagged with the iPad label](https://github.com/cdr/code-server/issues?q=is%3Aopen+is%3Aissue+label%3AiPad) for more.
|
|
|
|
## How to access code-server with a self signed certificate on iPad?
|
|
|
|
Accessing a self signed certificate on iPad isn't as easy as accepting through all
|
|
the security warnings. Safari will prevent WebSocket connections unless the certificate
|
|
is installed as a profile on the device.
|
|
|
|
The below assumes you are using the self signed certificate that code-server
|
|
generates for you. If not, that's fine but you'll have to make sure your certificate
|
|
abides by the following guidelines from Apple: https://support.apple.com/en-us/HT210176
|
|
|
|
**note**: Another undocumented requirement we noticed is that the certificate has to have `basicConstraints=CA:true`.
|
|
|
|
The following instructions assume you have code-server installed and running
|
|
with a self signed certificate. If not, please first go through [./guide.md](./guide.md)!
|
|
|
|
**warning**: Your iPad must access code-server via a domain name. It could be local
|
|
DNS like `mymacbookpro.local` but it must be a domain name. Otherwise Safari will
|
|
refuse to allow WebSockets to connect.
|
|
|
|
1. Your certificate **must** have a subject alt name that matches the hostname
|
|
at which you will access code-server from your iPad. You can pass this to code-server
|
|
so that it generates the certificate correctly with `--cert-host`.
|
|
2. Share your self signed certificate with the iPad.
|
|
- code-server will print the location of the certificate it has generated in the logs.
|
|
|
|
```
|
|
[2020-10-30T08:55:45.139Z] info - Using generated certificate and key for HTTPS: ~/.local/share/code-server/mymbp_local.crt
|
|
```
|
|
|
|
- You can mail it to yourself or if you have a Mac, it's easiest to just Airdrop to the iPad.
|
|
|
|
3. When opening the `*.crt` file, you'll be prompted to go into settings to install.
|
|
4. Go to `Settings -> General -> Profile`, select the profile and then hit `Install`.
|
|
- It should say the profile is verified.
|
|
5. Go to `Settings -> About -> Certificate Trust Settings` and enable full trust for
|
|
the certificate. [more apple support here](https://support.apple.com/en-us/HT204477)
|
|
6. Now you can access code-server! 🍻
|
|
|
|
### Servediter iPad App
|
|
|
|
If you are unable to get the self signed certificate working or you do not have a domain
|
|
name to use, you can use the Servediter iPad App instead!
|
|
|
|
**note**: This is not an officially supported app by the code-server team!
|
|
|
|
Download [Serveediter](https://apps.apple.com/us/app/servediter-for-code-server/id1504491325) from the
|
|
App Store and then input your server information. If you are running a local server or mabye a usb-c
|
|
connected Raspberry Pi, you will input your settings into "Self Hosted Server".
|
|
|
|
### Raspberry Pi USB-C Network
|
|
|
|
It is a bit out of scope for this project, however, great success is being reported using iPad on the go with just a single USB-C cable connected to a Raspberry Pi both powering and supplying direct network access. Many support articles already exist but the key steps boil down to turning on Network over USB-C on the Raspberry Pi itself and the rest of the steps are just like getting Code Server running any where else.
|
|
|
|
> Here are my keys to success. I bought a 4" touch screen with fan included that attaches as a case to the Pi. I use the touch screen for anytime I have connection issues, otherwise I turn off the Pi screen. I gave my Pi a network name so I can easily connect at home on wifi or when on go with 1 usb-c cable supplying power and network. LASTLY, not all usb-c cables are equal and not all will work so try different usb-c cables if you are going mad (confirm over wifi first then move to cable).
|
|
>
|
|
> -- <cite>Acker Apple</cite>
|