* Update Node types to 16
* Update Express core types
Fixes a number of conflicts it has with Node 16.
* Fix websocket router types
It seems req was `any` before so now we have to handle the types. Also
it seems the socket is of type `stream.Duplex`, not `net.Socket`.
The ws types had to be updated to support the new type.
Unfortunately Code still uses the old type so cast for now.
In the web socket router just use a cast for the extra properties we
add. We could add the types to the Express namespace but I am not sure
we really want these commonly accessible so keep with the casts for now.
Likely we should use Express's `locals` or something instead.
* Add missing return
Not sure why it only just now started complaining though.
Co-authored-by: Asher <ash@coder.com>
* docs: update maintaining
* chore(e2e): add maxFailures to playwright
* fix(ci): skip submodule in e2e job
We don't need the submodules for the e2e job. This will speed up the
checkout step.
* feat(ci): add test-e2e-proxy job
This adds a new job to CI to run our tests behind Caddy and simulate
code-server running against a reverse-proxy.
* refactor: make e2e work with reverse proxy
This refactors the e2e test in a couple ways:
- remove setting cookie in localStorage (instead we pass --auth none)
- refactor address() method to account for reverse proxy logic
* Update test/e2e/models/CodeServer.ts
* Update test/playwright.config.ts
* Update test/utils/constants.ts
Co-authored-by: Asher <ash@coder.com>
* Update test/utils/helpers.ts
Co-authored-by: Asher <ash@coder.com>
Co-authored-by: Asher <ash@coder.com>
* chore(release): bump version to 4.5.1
* chore: bump helm chart
* chore: update CHANGELOG
* Revert "chore: bump helm chart"
This reverts commit 703b03b665.
* chore: bump helm chart to 3.0.0
* revert: remove bad change to manifes.json icon
* fix(ci): add package.json.version to code cachekey
Before this, creating a release sometimes prevented vscode from
rebuilding and using the cache instead. Now we use the
package.json.version in the cache key to "bust" the cache if the
package.json version is updated (aka a release).
Fixes#5316
* Update .github/workflows/ci.yaml
Co-authored-by: Asher <ash@coder.com>
* fixup: formatting
* Revert "refactor: remove version check e2e test"
This reverts commit b23c398b7d.
Co-authored-by: Asher <ash@coder.com>
* chore(release): bump version to 4.5.0
* chore: update CHANGELOG
* chore: bump chart version
* docs: update MAINTAINING
* fix: add VSCODE_DEV=1 to e2e script
I'm not sure what changed in the latest version but without setting
VSCODE_DEV=1, code-server won't load. This fixes that.
* Revert "fix: add VSCODE_DEV=1 to e2e script"
This reverts commit 58c4826af8.
* fix: try setting VSCODE_DEV=1
* Revert "fix: try setting VSCODE_DEV=1"
This reverts commit 902f5f2f30.
* refactor: remove version check e2e test
I am not sure why this is passing locally and failing CI. I need to
further investigate this since it fails depending on where you test.
* refactor: switch to codecov-uploader GitHub Action
codecov deprecated their Node wrapper for uploading coverage reports.
This removes that and uses their new uploaded along with the v2 GitHub
Action they maintain.
* fix: update broken integration test
* feat: add installExtension integration test
This adds a new helper function called `runCodeServerCommand` along with
a test for `--install-extension`. We can use this approach for writing
integration tests (i.e. testing a real code-server build, CLI commands,
etc).
* refactor: s/ test:standalone with test:integration
This replaces our integration approach to use Jest instead of a single
bash script. By doing this, we will be able to easily maintain and add
to our integration test suite.
* refactor: filter unit tests
Now that our integration tests also use Jest, we need to update our unit
test script to ignore `test/integration`.
* refactor: add SKIP_SUBMODULE_DEPS to postinstall
* refactor: add SKIP_SUBMODULE_DEPS to postinstall
* fixup!: skip submod deps
* refactor: move runCodeServerCommand into sep. file
When Jest runs a test, it loads all the files and imports for that test.
This means you might be "requiring" code that's unrelated to your tests.
This leads to unexpected errors depending on where the code runs.
Moved this file to avoid GLIBC and other errors relaed to argon2 when
running integration tests in CI.
* fizup: formatting
* fizup: increase timeout
* refactor: use fixture in installExtension test
Instead of relying on a network to install an extension, we use a
fixture - vsix file in the repo. This is also faster.
* feat: add integration test for listExtensions
* chore: ignore integration fixtures
* fixup: formatting
* fixup: remove custom-hacks.css
* fixup: formatting
* Update test/integration/installExtension.test.ts
Co-authored-by: Asher <ash@coder.com>
* Update test/integration/listExtensions.test.ts
Co-authored-by: Asher <ash@coder.com>
* Update test/integration/installExtension.test.ts
Co-authored-by: Asher <ash@coder.com>
* Update test/integration/listExtensions.test.ts
Co-authored-by: Asher <ash@coder.com>
* fixup: contributing integration tests section
* fixup: update ci/readme
* fixup: use RELEASE_PATH in test-integration.sh
* refactor: unzip vsix for listExtensions
* refactor: use exec instead of spawn
* Update docs/CONTRIBUTING.md
Co-authored-by: Asher <ash@coder.com>
* Update test/integration/listExtensions.test.ts
Co-authored-by: Asher <ash@coder.com>
* Update test/integration/listExtensions.test.ts
Co-authored-by: Asher <ash@coder.com>
* Update test/integration/listExtensions.test.ts
Co-authored-by: Asher <ash@coder.com>
* refactor: use different default binary path
* fixup!: formatting
Co-authored-by: Asher <ash@coder.com>
* chore: upgrade Code to 1.66
* docs: update docs for Code upgrades
* fixup!: docs
* chore: update vscode submodule
* chore: update integration patch
* chore: update node-version patch
* chore: update github-auth patch
They completely changed how auth is handled for GitHub in
https://github.com/microsoft/vscode/pull/145424 so our patch may not
work. Will need to test and revisit.
* refactor: remove postinstall patch
It appears they renamed postinstall.js to postinstall.mjs and removed
the use of `rimraf` which means our patch is no longer needed! 🎉b0e8554cce
* chore: refresh local-storage patch
* chore: refresh service-worker patch
* chore: bulk refresh patches
* fixup!: docs formatting
* refactor: remove unused last-opened patch
* fixup!: formatting docs
* fixup!: formatting docs
* refactor: remove rsync postinstall
* Revert "refactor: remove rsync postinstall"
This reverts commit 8d6b613e9d.
* refactor: update postinstall.js to .mjs
* feat(patches): add parent-origin bypass
* docs(patches): add notes for testing store-socket
* docs(patches): update testing info for node-version
* refactor(patches): delete github-auth.diff patch
* docs(patches): add notes for testing connection-type
* fixup!: delete github-auth patch
* fixup!: update connection type testing
* docs(patches): add notes to insecure-notification.diff
* docs(patches): add nots for update-check.diff
* fixup!: remove comma in integration patch
* fix(e2e): disable workspace trust
* refactor: add --no-default-rc for yarn install
* feat(patches): remove yarnrc in presinstall
* fixup!: silly mistake
* docs: add note about KEEP_MODULES=1
* docs(patches): add testing notes for node-version
* refactor(patches): remove node-version
It appears this is no longer needed due to the `remote/package.json` now which
targets node rather than electron.
* fixup!: add cd ../.. to code upgrade instructions
* fixup!: add note to yarn --production flag
* fixup!: make parent-origin easier to upstream
* Revert "refactor(patches): delete github-auth.diff patch"
This reverts commit 31a354a343.
* Revert "fixup!: delete github-auth patch"
This reverts commit bdeb5212e8.
* Merge webview origin patch into webview patch
* Remove unused post-install patch
* Prevent builtin extensions from updating
* Refresh sourcemaps patch
* Update Node to v16
This matches the version in ./lib/vscode/remote/.yarnrc.
I changed the engine to exactly 16 since if you use any different
version it will just not work since the modules will have been built for
16 (due to the .yarnrc).
* Replace fs.rmdir with fs.rm
Node is showing a deprecation warning about it.
* Update github-auth patch
The local credentials provider is no longer used when there is a remote
so this code moved into the backend web credential provider.
* Prevent fs.rm from erroring about non-existent files
We were using fs.rmdir which presumably did not have the same behavior
in v14 (in v16 fs.rmdir also errors).
* Install Python 3 in CentOS CI container
Co-authored-by: Asher <ash@coder.com>
* Move Code to a submodule
Closes#4901.
* Base Code cache on hash and re-enable node_modules cache
The current setup appears to only rebuild VS Code if the dependencies
change but we need to rebuild it if anything changes.
I also re-enabled the commented out node_modules caches. They look like
they should work to me with the submodule method. I think the problem
occurred because Code itself was being installed in the yarn step.
* Update links in package.json
I will try checking the docs too
* docs: Update links in triage.md
* docs: Update links in npm.md
* docs: Update links in whatever files that have `cdr`
* Replace globally, thanks @bpmct!
* fix: coderer instead of coder
I should've used all three toggles in the Search/Replace tab in the GItHub.dev editor.
* Code Formatting
* Disable BROWSER env var
Right now the browser helper script does not actually work. It seems
safer to skip this until we can fix it.
* Bump to 4.0.2
* Update changelog for 4.0.2
* feat: add logic to publish beta/dev npm
This adds new log to publish the npm package both while working on PRs and when
PRs are merged into main, allowing us to easily test changes in a
production-like setting.
Co-authored-by: Asher <ash@coder.com>
* chore(deps): replace argon2 w/@node-rs/argon2
* refactor: clean up hashPassword functions
* refactor(util): pass in process.platform
* fix: use correct settings for test-extension
Before, it was running into errors with an @types package.
Now, we're correctly running `tsc` so it picks up our `tsconfig.json` and we're
telling TypeScript to not typecheck our lib and exclude `node_modules`
I think the problem is that when a proxy is not in use proxy-agent
returns the global agent...which is itself since we set it globally,
causing the loop.
VS Code already covers proxies meaning we only need to do it in our own
requests so to fix this pass in the agent in the version fetch request
instead of overidding globally.
Also avoid proxy-from-env and pass in the proxy URI instead as both
http_proxy and https_proxy can be used for either http or https requests
but it does not allow that.
* Implement last opened functionality
Fixes https://github.com/cdr/code-server/issues/4619
* Fix test temp dirs not being cleaned up
* Mock logger everywhere
This suppresses all the error and debug output we generate which makes
it hard to actually find which test has failed. It also gives us a
standard way to test logging for the few places we do that.
* Use separate data directories for unit test instances
Exactly as we do for the e2e tests.
* Add integration tests for vscode route
* Make settings use --user-data-dir
Without this test instances step on each other feet and they also
clobber your own non-test settings.
* Make redirects consistent
They will preserve the trailing slash if there is one.
* Remove compilation check
If you do a regular non-watch build there are no compilation stats so
this bricks VS Code in CI when running the unit tests.
I am not sure how best to fix this for the case where you have a build
that has not been packaged yet so I just removed it for now and added a
message to check if VS Code is compiling when in dev mode.
* Update code-server update endpoint name
* Add tests for relativeRoot
* Remove path.posix.join
Since this is for file system paths it feels incorrect to use it on
URL paths as they are different in many ways.
* Rewrite cookie path logic
Before we relied on the client to resolve the base given to it by the
backend against the path.
Instead have the client pass that information along so we can resolve it
on the backend. This means the client has to do less work.
* Do not remove out directory before watch
This is re-used for incremental compilation.
Also remove del since that was the only use (and we can use fs.rmdir in
the future if we need something like this).
* Remove unused function resolveBase
* Flesh out fixes to align with upstream.
* Update route handlers to better reflect fallback behavior.
* Add platform to vscode-reh-web task
Our strategy has been to build once and then recompile native modules
for individual platforms. It looks like VS Code builds from scratch for
each platform.
But we can target any platform, grab the pre-packaged folder, then
continue with own packaging.
In the future we may want to rework to match upstream.
* Fix issue where workspace args are not parsed.
* Fix issues surrounding opening files within code-server's terminal.
* Readd parent wrapper for hot reload.
* Allow more errors.
* Fix issues surrounding Coder link.
* Add dir creation and fix cli
It seems VS Code explodes when certain directories do not exist so
import the reh agent instead of the server component since it creates
the directories (require patching thus the VS Code update).
Also the CLI (for installing extensions) did not seem to be working so
point that to the same place since it also exports a function for
running that part of the CLI.
* Remove hardcoded VSCODE_DEV=1
This causes VS Code to use the development HTML file. Move this to the
watch command instead.
I deleted the other stuff before it as well since in the latest main.js
they do not have this code so I figure we should be safe to omit it.
* Fix mismatching commit between client and server
* Mostly restore command-line parity
Restore most everything and remove the added server arguments. This
will let us add and remove options after later so we can contain the
number of breaking changes.
To accomplish this a hard separation is added between the CLI arguments
and the server arguments.
The separation between user-provided arguments and arguments with
defaults is also made more clear.
The extra directory flags have been left out as they were buggy and
should be implemented upstream although I think there are better
solutions anyway. locale and install-source are unsupported with the
web remote and are left removed. It is unclear whether they were used
before anyway.
Some restored flags still need to have their behavior re-implemented.
* Fix static endpoint not emitting 404s
This fixes the last failing unit test.
Fix a missing dependency, add some generic reverse proxy support for the
protocol, and add back a missing nfpm fix.
* Import missing logError
* Fix 403 errors
* Add code-server version to about dialog
* Use user settings to disable welcome page
The workspace setting seems to be recognized but if so it is having no
effect.
* Update VS Code cache step with new build directories
Co-authored-by: Asher <ash@coder.com>
