Fix incorrect argon2 target in arm builds (#6453)

* Fix building from source on arm

Not building from source causes argon2 to pull the wrong arch, so we
have to build from source.

But building from source is causing the new Kerberos module to fail on
arm64 and keytar to fail on both.

The latter has been very difficult to debug because the GitHub image
provides a different result to containers based on Ubuntu 20.04.
Because of this, use a container instead.

Use debian:buster as the container because it is easier to set up the
architecture sources (no need to modify the sources) and because it
seems to come with glibc 2.28 rather than 2.31.

Also use the exact version of Node (18.15.0) for reproducibility.

* Set owner and group during tar to zero

Otherwise you get IDs that can cause (benign) errors while extracting,
which might be confusing.  At the very least, I did not see these errors
from previous tars (although they seem to use 1001).

There is no guarantee what IDs might exist so 0 seems the most
reasonable.

.github/workflows/release.yaml

@@ -38,7 +38,7 @@ jobs:
       - name: Install Node.js v18
         uses: actions/setup-node@v3
         with:
-          node-version: "18"
+          node-version: "18.15.0"
 
       - name: Install development tools
         run: |
@@ -100,27 +100,37 @@ jobs:
           discussion_category_name: "📣 Announcements"
           files: ./release-packages/*
 
-  # TODO: We should use the same CentOS image to cross-compile if possible?
   package-linux-cross:
     name: Linux cross-compile builds
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     timeout-minutes: 15
     needs: npm-version
+    container: "debian:buster"
     strategy:
       matrix:
         include:
           - prefix: aarch64-linux-gnu
-            arch: arm64
+            npm_arch: arm64
+            apt_arch: arm64
           - prefix: arm-linux-gnueabihf
-            arch: armv7l
+            npm_arch: armv7l
+            apt_arch: armhf
 
     env:
       AR: ${{ format('{0}-ar', matrix.prefix) }}
+      AS: ${{ format('{0}-as', matrix.prefix) }}
       CC: ${{ format('{0}-gcc', matrix.prefix) }}
+      CPP: ${{ format('{0}-cpp', matrix.prefix) }}
       CXX: ${{ format('{0}-g++', matrix.prefix) }}
-      LINK: ${{ format('{0}-g++', matrix.prefix) }}
-      npm_config_arch: ${{ matrix.arch }}
+      FC: ${{ format('{0}-gfortran', matrix.prefix) }}
+      LD: ${{ format('{0}-ld', matrix.prefix) }}
+      STRIP: ${{ format('{0}-strip', matrix.prefix) }}
+      PKG_CONFIG_PATH: ${{ format('/usr/lib/{0}/pkgconfig', matrix.prefix) }}
+      TARGET_ARCH: ${{ matrix.apt_arch }}
+      npm_config_arch: ${{ matrix.npm_arch }}
       NODE_VERSION: v18.15.0
+      # Not building from source results in an x86_64 argon2, as if
+      # npm_config_arch is being ignored.
       npm_config_build_from_source: true
 
     steps:
@@ -132,30 +142,25 @@ jobs:
         with:
           node-version: "18.15.0"
 
+      - name: Install cross-compiler and system dependencies
+        run: |
+          dpkg --add-architecture $TARGET_ARCH
+          apt-get update && apt-get install -y --no-install-recommends \
+            crossbuild-essential-$TARGET_ARCH \
+            libx11-dev:$TARGET_ARCH \
+            libx11-xcb-dev:$TARGET_ARCH \
+            libxkbfile-dev:$TARGET_ARCH \
+            libsecret-1-dev:$TARGET_ARCH \
+            libkrb5-dev:$TARGET_ARCH \
+            ca-certificates \
+            curl wget rsync gettext-base
+
       - name: Install nfpm
         run: |
           mkdir -p ~/.local/bin
           curl -sSfL https://github.com/goreleaser/nfpm/releases/download/v2.3.1/nfpm_2.3.1_`uname -s`_`uname -m`.tar.gz | tar -C ~/.local/bin -zxv nfpm
           echo "$HOME/.local/bin" >> $GITHUB_PATH
 
-      - name: Install cross-compiler and system dependencies (arm64)
-        if: ${{ matrix.arch != 'armv7l' }}
-        run: sudo apt update && sudo apt install -y $PACKAGE libkrb5-dev
-        env:
-          PACKAGE: ${{ format('g++-{0}', matrix.prefix) }}
-
-      - name: Install cross-compiler and system dependencies (armv7l)
-        if: ${{ matrix.arch == 'armv7l' }}
-        run: |
-          sudo sed -i "s/^deb/deb [arch=amd64,i386]/g" /etc/apt/sources.list
-          echo "deb [arch=arm64,armhf] http://ports.ubuntu.com/ $(lsb_release -s -c) main universe multiverse restricted" | sudo tee -a /etc/apt/sources.list
-          echo "deb [arch=arm64,armhf] http://ports.ubuntu.com/ $(lsb_release -s -c)-updates main universe multiverse restricted" | sudo tee -a /etc/apt/sources.list
-          sudo dpkg --add-architecture armhf
-          sudo apt update
-          sudo apt install -y $PACKAGE libkrb5-dev:armhf
-        env:
-          PACKAGE: ${{ format('g++-{0}', matrix.prefix) }}
-
       - name: Download npm package
         uses: actions/download-artifact@v3
         with:
@@ -183,7 +188,7 @@ jobs:
       - name: Build packages with nfpm
         env:
           VERSION: ${{ env.VERSION }}
-        run: yarn package ${npm_config_arch}
+        run: npm run package ${npm_config_arch}
 
       - uses: softprops/action-gh-release@v1
         with:
@@ -203,7 +208,7 @@ jobs:
       - name: Install Node.js v18
         uses: actions/setup-node@v3
         with:
-          node-version: "18"
+          node-version: "18.15.0"
 
       - name: Install nfpm
         run: |

ci/build/build-packages.sh

@@ -27,7 +27,7 @@ main() {
 release_archive() {
   local release_name="code-server-$VERSION-$OS-$ARCH"
   if [[ $OS == "linux" ]]; then
-    tar -czf "release-packages/$release_name.tar.gz" --transform "s/^\.\/release-standalone/$release_name/" ./release-standalone
+    tar -czf "release-packages/$release_name.tar.gz" --owner=0 --group=0 --transform "s/^\.\/release-standalone/$release_name/" ./release-standalone
   else
     tar -czf "release-packages/$release_name.tar.gz" -s "/^release-standalone/$release_name/" release-standalone
   fi

ci/build/build-standalone-release.sh

@@ -9,11 +9,11 @@ main() {
   rsync "$RELEASE_PATH/" "$RELEASE_PATH-standalone"
   RELEASE_PATH+=-standalone
 
-  # We cannot find the path to node from $PATH because yarn shims a script to ensure
-  # we use the same version it's using so we instead run a script with yarn that
-  # will print the path to node.
+  # We cannot get the path to Node from $PATH (for example via `which node`)
+  # because Yarn shims a script called `node` and we would end up just copying
+  # that script.  Instead we run Node and have it print its actual path.
   local node_path
-  node_path="$(yarn -s node <<< 'console.info(process.execPath)')"
+  node_path="$(node <<< 'console.info(process.execPath)')"
 
   mkdir -p "$RELEASE_PATH/bin"
   mkdir -p "$RELEASE_PATH/lib"